TOWER & SCREEN SYSTEM
- Home
- TOWER & SCREEN SYSTEM
LED WALL TRUSS (LED-LWT-01 & 02)
LED-LWT-01 LED Truss: SST-38 Towers and JT-H Truss span. For LED Screen from 200sq. feet till 600sq. feet with a maximum load of 1500 kg.
LED-LWT-02 LED Truss: SST-45 Towers and MT-W Truss span. For LED Screen from 200sq. feet till 600sq. feet with a maximum load of 3000 kg
Read moreLED WALL TRUSS (LED-LWT-03)
Not only LED Screens are being used at concerts nowadays but at all kind of events and promotional activities. LED Screens have a huge self weight hung on a few point loads and have a large closed surface. In the outdoor venues due to huge wind forces and multi point loads it is extremely important to choose the right system which can facilitate these forces.
Read moreSST-48 – TOWER
The SST-48 Tower is based on 480mm x 480mm vertical beam that allows the safe, quick lifting of regularly loaded horizontal DT Truss to their service height. In terms of static, the SST-48 Tower is designed for a high flexural- and pressure strain. It is provided with
aluminum (EN-AW-6082-T6). Top frame and sleeve block. Base is made of steel to provided maximum ground traction needed due to it’s weights and supports.
SST-45 – TOWER
The SST-45 Tower is based on 450mm x 450mm vertical beam that allows the safe, quick lifting of regularly loaded horizontal MT-W Truss to their service height. In terms of static, the SST-45 Tower is designed for a high flexural- and pressure strain. It is provided with
aluminum (EN-AW-6082-T6). Top frame and sleeve block. Base is made of steel to provided maximum ground traction needed due to it’s weights and supports.
SST-40 – TOWER
The SST-40 Tower is based on 400mm x 400mm vertical beam that allows the safe, quick lifting of regularly loaded horizontal MT Truss to their service height. In terms of static, the SST-40 Tower is designed for a high flexural- and pressure strain. It is provided with
aluminum (EN-AW-6082-T6). Top frame and sleeve block. Base is made of steel to provided maximum ground traction needed due to it’s weights and supports.
SST-38 – TOWER
The SST-38 Tower is based on 380mm x 380mm vertical beam that
allows the safe, quick lifting of regularly loaded horizontal JT-H & JT-X
Truss to their service height. In terms of static, the SST-38 Tower is
designed for a high flexural- and pressure strain. It is provided with
aluminum (6082-T6).