SST-38 – Tower

The SST-38 Tower is based on 380mm x 380mm vertical beam that
allows the safe, quick lifting of regularly loaded horizontal JT-H & JT-X
Truss to their service height. In terms of static, the SST-38 Tower is
designed for a high flexural- and pressure strain. It is provided with
aluminum (6082-T6). Top frame and sleeve block. Base is made of steel
to provided maximum ground traction needed due to it’s weights and
supports. Dual height adjusted on each ground support make it very
rigid structure to be used indoor or outdoor.

Tolerance free conical connector system.
Steel base equipped with high quality Nylon wheels
Multi-functional Top Part for use with manual and motorized hoists
4 Side Webbing.
Short & Long outriggers available.
High stability aluminum alloy.
High wear resistance.
3 mm wall thickness of 50 mm main tube.

Height:                                       380mm

Width:                                        380mm

Main Tube:                               50×3 mm

Sub Tube:                                  30x3mm

Braces:                                      30x3mm

Material:                         EN-AW-6082 T6

Connection:                           SG2(50mm)

Made with aluminum alloy (EN-AW-6082-T6) with hook monitoring on sleeve block make it easy for use and reduce the uses of straps additional attachment can be provided for electric chain hoist with precise manufacturing the connection is error free and can be fitted easy to and fro. Top plate can be provided with steel pulleys as well as nylon pulleys as per requirement.

A strong, safe and cost effective solution to erect the SST-38 Tower. The hinge sets are 100mm long. Those half connectors with a hinge fork allow a very high vertical load.

4 Hinge sets (2 left and 2 right) are required per tower.

Base is made of steel rectangular section(96x48mm) with 3.2mm thickness fitted with Nylon wheels which ensure loads on various ground conditions with dual height adjuster on outriggers allow it to be fitted without interference half-male SG2 connections allow the tower to be fitted with less efforts more precise.

The outriggers is made with steel rectangular section (80x40mm) available in short outriggers and long outriggers in combination with stabilizer bars and it depends on the purpose when which to use. We are using dual height adjuster for long outriggers. At outdoor with maximum height the long outriggers is recommended which is indoor the short outriggers can be used when height is below 20ft. Next to the standard parts Devil Truss supply additional accessories, which can be demanded for different usage for stability.